Skip to main content

Modelling the spatial distribution of the nuisance mosquito species Anopheles plumbeus (Diptera: Culicidae) in the Netherlands

Abstract

Background

Landscape modifications, urbanization or changes of use of rural-agricultural areas can create more favourable conditions for certain mosquito species and therefore indirectly cause nuisance problems for humans. This could potentially result in mosquito-borne disease outbreaks when the nuisance is caused by mosquito species that can transmit pathogens. Anopheles plumbeus is a nuisance mosquito species and a potential malaria vector. It is one of the most frequently observed species in the Netherlands. Information on the distribution of this species is essential for risk assessments. The purpose of the study was to investigate the potential spatial distribution of An. plumbeus in the Netherlands.

Methods

Random forest models were used to link the occurrence and the abundance of An. plumbeus with environmental features and to produce distribution maps in the Netherlands. Mosquito data were collected using a cross-sectional study design in the Netherlands, from April to October 2010ā€“2013. The environmental data were obtained from satellite imagery and weather stations. Statistical measures (accuracy for the occurrence model and mean squared error for the abundance model) were used to evaluate the models performance. The models were externally validated.

Results

The maps show that forested areas (centre of the Netherlands) and the east of the country were predicted as suitable for An. plumbeus. In particular high suitability and high abundance was predicted in the south-eastern provinces Limburg and North Brabant. Elevation, precipitation, day and night temperature and vegetation indices were important predictors for calculating the probability of occurrence for An. plumbeus. The probability of occurrence, vegetation indices and precipitation were important for predicting its abundance. The AUC value was 0.73 and the error in the validation was 0.29; the mean squared error value was 0.12.

Conclusions

The areas identified by the model as suitable and with high abundance of An. plumbeus, are consistent with the areas from which nuisance was reported. Our results can be helpful in the assessment of vector-borne disease risk.

Background

Mosquitoes (Diptera:Culicidae) are known to be vectors of a large number of pathogens around the globe and are considered as prime candidates for transmitting (re-)emerging vector-borne diseases (VBDs) in Europe [1]. The increased mobility of humans, that has also increased the mobility of livestock and pathogens, as well as environmental modifications and climate changes can contribute to the (re-)emergence of vector-borne diseases [2]. Furthermore, mosquito bites can cause a considerable nuisance for humans and mammals. Severe nuisance can have negative economic consequences (e.g., in tourism, work productivity outdoors, meat and dairy production) [3]. These nuisance situations can eventually lead to autochthonous VBD cases, when in non-endemic areas infectious reservoirs, either humans (travellers, temporary workers) or animals (livestock, migrating animals) come in contact with high density of mosquito vectors.

In 2010, in the Netherlands, the Centre for Monitoring of Vectors (CMV) started a nationwide inventory of indigenous mosquitoes to acquire basic information on the composition, geographical distribution, biodiversity and environmental preferences of mosquito species. In this survey, the nuisance mosquito species and potential malaria vector Anopheles plumbeus (Stephens, 1828) (FigureĀ 1) was one of the most frequently collected mosquito species [4]. This species has been proven to be able to transmit Plasmodium falciparum (Welch, 1897), the causative agent of malaria tropica [5]. Circumstantial evidence for local transmission of P. falciparum malaria by An. plumbeus has been reported for Germany [6]. Anopheles plumbeus has also been incriminated as a vector of Plasmodium vivax (Grassi & Feletti, 1890) [7,8] and has been proven to be a laboratory vector of West Nile virus [9]. Even though the health care system is likely to rapidly identify malaria patients and thereby prevent the building up of an infectious human reservoir of Plasmodium parasites [10], it is important to gain information on the spatial distribution of An. plumbeus, in order to inform the health care system on the areas at risk.

Figure 1
figure 1

Anopheles plumbeus female (source: A. IbaƱez-Justicia).

Anopheles plumbeus is a mosquito species commonly found in forests, where larvae are usually found in water in rot-holes of trees with high salinity and deficiency of oxygen [11]. They can also be found in containers with stagnant rain water and groundwater, such as tyres, rainwater casks and cemetery vases [5,12]. In the last decade, this species has also been associated with abandoned stables where it breeds in the rain water collected in the manure cellars [13]. This species is known to be a particularly aggressive biter, feeding at any time of the day on different mammalian hosts (including humans), and to a lesser degree on birds and reptiles [14]. In June 2006, nuisance caused by An. plumbeus was reported for the first time in the Netherlands, near the city of Nijmegen [1]. Since then, An. plumbeus nuisance have been reported every year in the Netherlands, mostly in proximity to abandoned pig stables (Ibanez-Justicia, unpublished).

An understanding of the spatial extent of potential vector species, their abundance and seasonal activity, is important for estimating levels of risks of VBDs and enabling better targeting for surveillance and control. In order to develop basic reproduction number (R0) models and construct risk maps that indicate the risk for an outbreak after an introduction, abundance data of vectors are an essential parameter [15,16]. Although vector presence and abundance are not the only factors determining whether or not a pathogen can spread in an area, determining the distribution of the vector is an essential step in studying the risk of transmission of a pathogen. Given the nuisance and potential risk for the human health, such information on An. plumbeus is needed. Currently, no information on the potential spatial distribution of this species is available for the Netherlands.

In this study, we modelled the potential spatial distribution, expressed in occurrence (predicted probability of presence) and abundance of An. plumbeus in the Netherlands, based on data collected during the National Mosquito Survey and environmental data. The occurrence was modelled to predict the environmental suitability of the species using a random classification forest model. The abundance was modelled using a random regression forest model with the aim to identify areas where mosquito peaks could be expected. Random (classification and regression) forest models allow external validation through a bootstrapping procedure. The occurrence model was validated also with an external dataset. The resulting maps are in agreement with the reported nuisance for this species and the predictions show a good matching with an external dataset used to validate the model.

Methods

Species distribution modelling links the occurrence or the abundance of species with environmental data and estimates the similarity of the conditions at any site based on the conditions at the locations of known occurrence/abundance of a species. Here we describe the mosquito data collection, the environmental data used and the statistical methods applied in this study.

Mosquito data

Mosquito data used for the modelling were obtained from the national mosquitoes survey that was carried out from April to October 2010ā€“2013 by the Dutch Centre for Monitoring of Vectors. Mosquitoes were captured using CO2 baited Mosquito Magnet Liberty Plus MM3100 (WoodstreamĀ® Co., Lititz, USA). Traps were randomly distributed in the country following a cross-sectional study design, with the following constraint: 40% of the traps were placed in urban areas, 40% in rural-agricultural areas and 20% in natural areas [4]. Urban and agricultural areas were sampled more intensively, because of the potential higher human and veterinary health risk in those areas due to higher exposure.

Data consisted of mosquito abundance data, sampled at 778 locations. For this study the abundance data were reclassified into data of presence (when at least one mosquito was found in the trap) and absence (when no mosquitoes were found in the trap). Each of the locations was sampled only once and each trap was active for one week. The content of the traps was collected weekly and sent to the CMV laboratory. In the laboratory, mosquitoes were morphologically identified using, among others, the Culicidae key specifically designed for rapid field-identification of Dutch adult Culicidae (modified key after Snow [17], Schaffner et al. [9], Verdonschot [18], Becker et al. [19]). Twenty-seven mosquito species were found in the National Mosquito Survey and An. plumbeus was the 7th mosquito species most commonly found in the Netherlands. This species was active in the whole period of the survey, from April until October [4]. When a presence and an absence point were in the same square kilometre only the presence point was used because presences inform about the places that are environmental suitable for a species, but absences do not necessarily indicate the opposite [20]. This reduced the number of locations used in the analysis from 778 to 766.

For the validation of the occurrence model, data on An. plumbeus presence from confirmed nuisance notifications and data from other mosquito surveys carried out by the CMV in the Netherlands during the years 2010ā€“2014 were used (TableĀ 1). The mosquito data from these surveys were collected with various trapping methods: dippers, pooters, CDC miniature light traps Model 512 (John W. Hock Company, Gainesville, USA), BG Sentinel traps (Biogents AG, Regensburg, Germany) and Mosquito Magnet traps. These data were extracted from VecBase, a tailor-made application built for CMV in 2010 for vector surveillance data.

Table 1 Surveys used for the validation

Environmental variables

The environmental data included in the analysis as predictor variables are 1Ā km2 resolution satellite images and meteorological data in raster file format, commonly used for mosquito distribution modelling [21]. The images were obtained from the MODIS sensor on NASAā€™s Terra and Aqua satellites [22,23] for 2000ā€“2012 and subjected to temporal Fourier transformation [24,25] to summarise the images and to produce sets of data that capture characteristics of the annual seasonality: the mean, the annual, bi-annual and tri-annual amplitudes and phases, the maxima, minima and variances of the middle infra-red, day and night-time land surface temperature, the enhanced vegetation index and the normalized difference vegetation index signals [26]. Other environmental data used in this study are precipitation (WorldClim [27] and CMORPH [28] 1950ā€“2000), population density (compiled from the Gridded Population of the World Dataset 2000 [29]), the digital elevation model (MODIS [23] 2012) and land cover (Corine land cover map of 2006 [30]). The Fourier components used are provided in TableĀ 2 and the environmental data in TableĀ 3. For each trap location the pixel values of the environmental variables were extracted.

Table 2 Fourier components from temporal Fourier analysis of an imagery time series
Table 3 Environmental predictor variables

Statistical analysis

Occurrence model

Three distribution modelling techniques suitable for occurrence data were applied: non-linear discriminant analysis [25], random classification forest [31] and generalised linear model [32]. For each model, the accuracy was assessed using (i) sensitivity, i.e. the ability of a model to correctly identify known positive sites; (ii) specificity, i.e. the ability of a model to correctly identify known negative sites; (iii) the area under the curve, (AUC) that can be roughly interpreted as the probability that a model will correctly predict positive and negative sites [33]. Of the three techniques, random forest provided the best accuracy and therefore the results of this model are presented.

A random classification forest model consists of an ensemble of trees. To create a reliable model, it is generally considered necessary to have the same number of presence and absence points as input. This is because having a different number will create a bias in the model prediction towards the more prevalent category (presence or absence) [33]. For this reason, a ā€˜balancedā€™ subset of the data, i.e., a dataset with the same number of presences and absences, was selected. The output produced by the model is an environmental suitability indicator, expressed as a value between 0 (low suitability) and 1 (high suitability). The predictions are visualised in a map with colours ranging from red (high suitability) to blue (low suitability). A list of the most important variables used in the model is given based on the mean decrease in Gini index [31,34]. Random forest allows external validation through a bootstrapping procedure: for each tree, a random subset of the full dataset is sampled with replacement. The model validation is carried out for each tree using the points not used from the full dataset. This validation method is referred to as external, because the model is validated using data that are not used to build the tree. The comparison of the observed and predicted results enables us to calculate accuracy statistics, such as sensitivity and specificity. These measures are calculated for each tree and then averaged to give the overall values.

The predictions produced by the random classification forest were also externally validated against 45 observations from other surveys (TableĀ 1) that reported only the presence of An. plumbeus. Comparing the observations obtained with the other surveys and the predictions made by the model using National Mosquito Survey data, the error rate was calculated as the proportion of incorrectly predicted pixels to the total number of points used in the validation.

Abundance model

The abundance of the species was modelled using a random regression forest model. The abundance data were transformed according to the formula log 10 (abundanceā€‰+ā€‰1) [35]. Because the aim was to identify areas where mosquito peaks could be expected, only the data collected in months in which peaks were observed were selected (June-September). The predicted environmental suitability obtained with the occurrence model described above, was included as one of the predictor variables for modelling the abundance of the species, as it is frequently done in this type of analysis [36-40]. The predicted abundance is interpreted as the expected maximum number of mosquitoes caught in a trap in a certain pixel. The predictions are visualised in a map with colours ranging from light green (low abundance) to dark green (high abundance). The importance of the predictors was assessed using the Increase in Node Purity (INP). The difference between observed and predicted values was expressed as the mean squared error. The analysis has been performed with the software Vecmap demo version [41]. The maps have been produced with Quantum GIS [42].

Results and discussion

The probability of occurrence (environmental suitability) and the abundance of An. plumbeus have been predicted using mosquito field data and environmental data. The estimated environmental suitability and abundance are shown in maps. The important environmental variables used in the models and the accuracy of the models are discussed. The fact that out of three different modelling techniques for occurrence data random forest model was selected based upon its higher classification accuracy is consistent with earlier findings; random forest has been reported to outperform other traditional modelling techniques [43-45].

An. plumbeus was found in 100 locations out of 766, and it was observed in particular in the eastern part of the Netherlands (FigureĀ 2a). The percentage of traps containing An. plumbeus per week is shown in FigureĀ 3. For the modelling, 97 presence points and 97 absence points were selected. Using the random forest model, forest-rich areas in the centre of the Netherlands (e.g. National Park Hoge Veluwe and National Park Utrechtse Heuvelrug) are predicted as suitable for An. plumbeus (FigureĀ 2b). Also the eastern parts of the country and in particular the southeastern provinces (Limburg and North Brabant) are predicted to be suitable. In these two provinces nuisance is often reported, especially close to abandoned and un-cleaned pig stables, where mosquitoes breed in manure pools [13]. Based on the environmental characteristics included in the analysis, the model was capable of identifying areas where An. plumbeus is truly present, meaning that these characteristics can be a good proxy for abandoned and un-cleaned stables.

Figure 2
figure 2

Observed presence and absence points and map of the estimated environmental suitability for An. plumbeus. A- Presence and absence observed during the National Mosquito Survey program carried out from April to October 2010ā€“2013. B- Environmental suitability map of An. plumbeus produced using classification random forest. Environmental suitability is depicted using a gradient fill: blue indicates low environmental suitability, red indicates high suitability. Locations where other surveys took place are also shown on the map (black squares).

Figure 3
figure 3

Percentage of positive sites of An. plumbeus per week in 2010ā€“2013.

Elevation, precipitation, day and night temperature, vegetation indices and middle infra-red (index sensitive to changes in the vegetation) were found to be important predictors for environmental suitability for An. plumbeus (TableĀ 4). Precipitation and vegetation are likely to be biologically relevant, since this species typically breeds in water-filled tree holes with high organic material content [19]. Presence of tree-holes is related to the age of the tree or to the tree species. Eggs of this mosquito species are not laid on the water surface but on the sides of potential breeding sites, just above the waterline, so the number of generations produced each year are often dependent upon hydrological conditions [19]. The occurrence model predicts environmental suitability for An. plumbeus in areas where old trees with tree-holes are known to occur (e.g., National Park Hoge Veluwe). Even though the species is considered to be a tree-hole breeding species, results obtained using the random forest occurrence model depict environmental suitability for this species in areas without forests in the Netherlands. The results indicate the potential successful use of unforested environments for An. plumbeus populations, and imply a similar trend to that seen in continental Europe and UK, where An. plumbeus is shifting habitats from almost exclusively breeding in tree-holes to exploiting a wider array of novel man-made larval breeding sites [4,46]. Day and night temperature were found to be related to environmental suitability also in another study in Belgium [1].

Table 4 List of the top 10 most important variables in the occurrence model

Fair accuracy was obtained with the model (AUCā€‰=ā€‰0.73), which showed a better ability in identifying suitable environments (sensitivity 0.71) than unsuitable environments (specificity 0.66). The accuracy is improved as compared with a first attempt of predicting the environmental suitability for An. plumbeus in the Netherlands, where the environmental suitability was extrapolated from Belgium to the Netherlands (sensitivityā€‰=ā€‰0.50, specificityā€‰=ā€‰0.49) [1]. The error rate calculated to compare the predicted values to data of other surveys was low (0.29); 71% of the pixels were correctly predicted, meaning that the model could make good predictions in non-sampled areas. However, this is only a partial validation because it considers only presence points and does not give information about the performance of the model in predicting absence points.

The observed and estimated abundance are shown in FigureĀ 4. In the summer, the observed field abundance was low; rarely more than 10 mosquitoes per trap were found (TableĀ 5). The maximum value observed was 1701 mosquitoes followed by 62 mosquitoes per trap. Given the huge difference between the maximum value and the numbers of mosquitoes observed in the other traps, the maximum value was considered as outlier and excluded from the analysis. However, the reason of this high abundance was investigated and it turned out that the trap was located in a rural area where cattle farms with abandoned stables, not in use anymore, are present. In total, 505 mosquitoes were used in the analysis and they were captured in 80 traps/weeks from 2010 to 2013. The predicted abundance, produced with the random forest technique, was also low (with a maximum of 15 individuals per trap) and the highest abundance was predicted in the eastern part of the country and especially in the south-eastern provinces Limburg and Brabant. These findings are in agreement with the suitable areas identified by the occurrence model. This is not surprising because the probability of occurrence was the most important factor among the environmental factors included in the abundance model (TableĀ 6). Similar results, where the probability of occurrence appears to be the most important factor when using this technique, were already observed in a study conducted on other mosquito and biting midges species in the Netherlands [35]. Other important predictors for abundance of An. plumbeus were precipitation and vegetation, in accordance with the biology of the species, as it is explained above. The difference between the observed abundance and the predicted abundance was small, with a mean squared error value of 0.12, meaning that the model predictions matched the observation.

Figure 4
figure 4

Observed and estimated abundance of An. plumbeus. A ā€“ Observed abundance represented as log 10 (abundanceā€‰+ā€‰1). B ā€“ Map of the estimated abundance produced using a regression random forest. A darker colour indicates higher abundance.

Table 5 Observed abundance used in the model
Table 6 List of the top 10 most important variables in the abundance model

Conclusions

The aim of this study was to investigate the potential spatial distribution of An. plumbeus in the Netherlands. Using random (classification and regression) forest models, we identified areas with high environmental suitability and high abundance of this species in south-eastern provinces of Limburg and Brabant. These areas coincide with the areas where in recent years most nuisances have been reported. The predictions of the occurrence model were accurate and matched the external dataset used for validation. The abundance model predictions also matched the observation.

The output of species distribution modelling method can be used as an input for risk assessment of establishment and spread of vector-borne diseases [47,48]. Understanding and depicting the potential spatial distribution of mosquito species with modelling techniques is of increasing importance, especially for nuisance mosquito species that can cause economic implications or impact on human health.

References

  1. Versteirt V, De Clercq E, Dekoninck W, Damiens D, Ayrinhac A, Jacobs F, et al. Mosquito Vectors of Disease: Spatial Biodiversity, Drivers of Change, and Risk. Final Report. Brussels: Belgian Science Policy; 2009.

    Google ScholarĀ 

  2. Randolph SE, Rogers DJ. The arrival, establishment and spread of exotic diseases: patterns and predictions. Nat Rev Microbiol. 2010;8:361ā€“71.

    ArticleĀ  CASĀ  PubMedĀ  Google ScholarĀ 

  3. Connelly CR, Carlson DB. Florida Coordinating Council on mosquito control. Florida mosquito control: The state of the mission as defined by mosquito controllers, regulators, and environmental managers. Vero Beach, Florida: University of Florida, Institute of Food and Agricultural; 2009.

    Google ScholarĀ 

  4. IbaƱez-Justicia A, Stroo A, Dik M, Beeuwkes J, Scholte EJ: National Mosquito (Diptera, Culicidae) Survey in the Netherlands 2010ā€“2013. J Med Entomol 2015. doi: 10.1093/jme/tju058.

  5. Schaffner F, ThiƩry I, Kaufmann C, Zettor A, Lengeler C, Mathis A, Bourgouin C. Anopheles plumbeus (Diptera: Culicidae) in Europe: a mere nuisance mosquito or potential malaria vector? Malar J. 2012;11:393.

    ArticleĀ  PubMed CentralĀ  PubMedĀ  Google ScholarĀ 

  6. KrĆ¼ger A, Rech A, Su X-Z, Tannich E. Two cases of autochthonous Plasmodium falciparum malaria in Germany with evidence for local transmission by indigenous Anopheles plumbeus. Trop Med Int Heal. 2001;6:983ā€“5.

    ArticleĀ  Google ScholarĀ 

  7. Shute PG, Maryon M. Malaria in England past, present and future. J R Soc Promot Health. 1974;94:23ā€“9.

    ArticleĀ  CASĀ  Google ScholarĀ 

  8. Sokolova MI, Snow KR. Malaria vectors in European Russia. Eur Mosq Bull. 2002;12:1ā€“6.

    Google ScholarĀ 

  9. Schaffner F, Angel G, Geoffroy B, Hervy JP, Rhaiem A, Brunhes J. The mosquitoes of Europe, an identification and training programme. Montpellier: Fr IRD; 2001.

    Google ScholarĀ 

  10. Takken W, Kager PA, Verhave JP. Will malaria return to North-west Europe? In: Emerg pests vector-borne Dis. Wageningen: Wageningen Academic Publishers; 2007. p. 23ā€“34.

    ChapterĀ  Google ScholarĀ 

  11. Bradshaw WE, Holzapfel CM. Fitness and habitat segregation of British tree-hole mosquitoes. Ecol Entomol. 1991;16:133ā€“44.

    ArticleĀ  Google ScholarĀ 

  12. Marshall JF. The British mosquitoes. London: Brit. Mus. Nat Hist; 1938. p. 341.

    Google ScholarĀ 

  13. Dekoninck W, Hendrickx F, Van Bortel W, Versteirt V, Coosemans M, Damiens D, et al. Human-induced expanded distribution of Anopheles plumbeus, experimental vector of West Nile virus and a potential vector of human malaria in Belgium. J Med Entomol. 2011;48:924ā€“8.

    ArticleĀ  CASĀ  PubMedĀ  Google ScholarĀ 

  14. Bueno MarĆ­ R, JimĆ©nez PeydrĆ³ R. Study of the malariogenic potential of Eastern Spain. Trop Biomed. 2012;29(1):39ā€“50.

    PubMedĀ  Google ScholarĀ 

  15. Hartemink NA, Purse BV, Meiswinkel R, Brown HE, De Koeijer A, Elbers ARW, et al. Mapping the basic reproduction number (R0) for vector-borne diseases: A case study on bluetongue virus. Epidemics. 2009;1:153ā€“61.

    ArticleĀ  CASĀ  PubMedĀ  Google ScholarĀ 

  16. Hartemink N, Vanwambeke SO, Heesterbeek H, Rogers D, Morley D, Pesson B, et al. Integrated Mapping of Establishment Risk for Emerging Vector-Borne Infections: A Case Study of Canine Leishmaniasis in Southwest France. PLoS One. 2011;6:e20817.

    ArticleĀ  CASĀ  PubMed CentralĀ  PubMedĀ  Google ScholarĀ 

  17. Snow KR. Mosquitoes. Naturalistā€™ Handbooks 14. Slough, England: Richmond Publishing Co. Ltd; 1990. p. 66.

    Google ScholarĀ 

  18. Verdonschot P. Family Culicidae. In: Beuk PLT, editor. Checklist of the Diptera in the Netherlands. Utrecht: KNNV Publishers; 2002. p. 98.

    Google ScholarĀ 

  19. Becker N, Petric D, Zgomba M, Boase C, Madon M, Dahl C, et al. Mosquitoes and Their Control. Heidelberg, Dordrecht, New York: Springer; 2010. p. 577.

    BookĀ  Google ScholarĀ 

  20. Lobo JM, JimĆ©nez-Valverde A, Hortal J. The uncertain nature of absences and their importance in species distribution modelling. Ecography (Cop). 2010;33:103ā€“14.

    ArticleĀ  Google ScholarĀ 

  21. European Centre for Disease Prevention and Control (ECDC). Environmental Risk Mapping: Aedes albopictus in Europe. Stockholm: ECDC; 2013. Available from: http://www.ecdc.europa.eu/en/publications/Publications/climate-change-environmental-risk-mapping-aedes.pdf.

    Google ScholarĀ 

  22. Justice C, Townshend J, Vermote E, Sohlberg R, Descloitres J, Roy D, et al. Preliminary land surface products from the NASA Moderate Resolution Imaging Spectroradiometer (MODIS). In: Geosci Remote Sens Symp 2000 Proceedings IGARSS 2000 IEEE 2000 Int. Volume 3. 2000. p. 1157ā€“62.

    Google ScholarĀ 

  23. MODIS. [modis.gsfc.nasa.gov].

  24. Rogers DJ, Williams BG. Tsetse distribution in Africa: seeing the wood and the trees. 1994.

    Google ScholarĀ 

  25. Rogers DJ. Satellites, space, time and the African trypanosomiases. Adv Parasitol. 2000;47:129ā€“71.

    CASĀ  PubMedĀ  Google ScholarĀ 

  26. Scharlemann JPW, Benz D, Hay SI, Purse BV, Tatem AJ, Wint GRW, et al. Global data for ecology and epidemiology: a novel algorithm for temporal Fourier processing MODIS data. PLoS One. 2008;3:e1408.

    ArticleĀ  PubMed CentralĀ  PubMedĀ  Google ScholarĀ 

  27. WorldClim - Global Climate Data [www.worldclim.org].

  28. National Weather Service Climate Prediction Center [www.cpc.ncep.noaa.gov].

  29. Socioeconomic Data and Applications Center [sedac.ciesin.columbia.edu].

  30. European Environment Agency [www.eea.europa.eu].

  31. Breiman L. Random forests. Mach Learn. 2001;45:5ā€“32.

    ArticleĀ  Google ScholarĀ 

  32. McCullagh P, Nelder JA. Generalized Linear Models. Volume 37. London: Chapman & Hall; 1989.

    BookĀ  Google ScholarĀ 

  33. Fielding AH, Bell JF. A review of methods for the assessment of prediction errors in conservation presence/absence models. Environ Conserv. 1997;24:38ā€“49.

    ArticleĀ  Google ScholarĀ 

  34. Breiman L, Friedman JH, Olshen RA, Stone CJ. Classification and Regression Trees. Belmont, California, USA: Wadsworth international group; 1984.

    Google ScholarĀ 

  35. Avia-GIS. Abundance Modeling of Mosquito and Biting Midge Species in the Netherlands. 2012.

    Google ScholarĀ 

  36. Osborne PE, Alonso JC, Bryant RG. Modelling landscape-scale habitat use using GIS and remote sensing: a case study with great bustards. J Appl Ecol. 2001;38:458ā€“71.

    ArticleĀ  Google ScholarĀ 

  37. Boyce MS, Vernier PR, Nielsen SE, Schmiegelow FKA. Evaluating resource selection functions. Ecol Modell. 2002;157:281ā€“300.

    ArticleĀ  Google ScholarĀ 

  38. Gibson LA, Wilson BA, Cahill DM, Hill J. Spatial prediction of rufous bristlebird habitat in a coastal heathland: a GIS-based approach. J Appl Ecol. 2004;41:213ā€“23.

    ArticleĀ  Google ScholarĀ 

  39. Chefaoui RM, Hortal J, Lobo JM. Potential distribution modelling, niche characterization and conservation status assessment using GIS tools: a case study of Iberianā€‰<ā€‰iā€‰>ā€‰Copris</iā€‰>ā€‰species. Biol Conserv. 2005;122:327ā€“38.

    ArticleĀ  Google ScholarĀ 

  40. Calvete C, Estrada R, Miranda MA, Borras D, Calvo JH, Lucientes J. Modelling the distributions and spatial coincidence of bluetongue vectors Culicoides imicola and the Culicoides obsoletus group throughout the Iberian peninsula. Med Vet Entomol. 2008;22:124ā€“34.

    ArticleĀ  CASĀ  PubMedĀ  Google ScholarĀ 

  41. Avia-GIS. VecmapTM. A one-stop-shop for vector mapping, Zoersel, Belgium. http://www.avia-gis.com/vecmap. 2014.

  42. QGIS Development Team. QGIS Geographic Information System. 2012.

    Google ScholarĀ 

  43. Cutler DR, Edwards Jr TC, Beard KH, Cutler A, Hess KT, Gibson J, et al. Random forests for classification in ecology. Ecology. 2007;88:2783ā€“92.

    ArticleĀ  PubMedĀ  Google ScholarĀ 

  44. Peters J, Baets BD, Verhoest NEC, Samson R, Degroeve S, Becker PD, et al. Random forests as a tool for ecohydrological distribution modelling. Ecol Modell. 2007;207:304ā€“18.

    ArticleĀ  Google ScholarĀ 

  45. Cianci D, Hartemink N, IbƔƱez-Justicia A. Modelling the potential spatial distribution of mosquito species in the Netherlands using three different techniques. Int J Health Geogr. 2015;14:10. doi: 10.1186/s12942-015-0001-0.

    ArticleĀ  PubMed CentralĀ  PubMedĀ  Google ScholarĀ 

  46. Townroe S, Callaghan A. British container breeding mosquitoes: the impact of urbanisation and climate change on community composition and phenology. PLoS One. 2014;9:e95325.

    ArticleĀ  PubMed CentralĀ  PubMedĀ  Google ScholarĀ 

  47. Miller J. Species distribution modeling. Geogr Compass. 2010;4:490ā€“509.

    ArticleĀ  Google ScholarĀ 

  48. Fischer EAJ, Boender G-J, Nodelijk G, de Koeijer AA, Van Roermund HJ. The transmission potential of Rift Valley fever virus among livestock in the Netherlands: a modelling study. Vet Res. 2013;44:58.

    ArticleĀ  PubMed CentralĀ  PubMedĀ  Google ScholarĀ 

Download references

Acknowledgements

The authors would like to thank Nienke Hartemink and Marieta Braks for a critical reading of the manuscript and useful comments. The authors would also like to thank Els Ducheyne and Wesley Tack for helpful discussion and suggestions. This study was funded by EU grant FP7-261504 EDENext and is catalogued by the EDENext Steering Committee as EDENext311 (http://www.edenext.eu). The contents of this publication are the sole responsibility of the authors and do not necessarily reflect the views of the European Commission.

Author information

Authors and Affiliations

Authors

Corresponding author

Correspondence to Daniela Cianci.

Additional information

Competing interests

The authors declare that they have no competing interests.

Authorsā€™ contributions

DC and AIJ designed the study. AIJ collected the data. DC did the data preparation and performed the statistical analysis. DC and AIJ wrote the paper. Both authors read and approved the final version of the manuscript.

Adolfo IbaƱez-Justicia and Daniela Cianci contributed equally to this work.

Rights and permissions

This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly credited. The Creative Commons Public Domain Dedication waiver (http://creativecommons.org/publicdomain/zero/1.0/) applies to the data made available in this article, unless otherwise stated.

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

IbaƱez-Justicia, A., Cianci, D. Modelling the spatial distribution of the nuisance mosquito species Anopheles plumbeus (Diptera: Culicidae) in the Netherlands. Parasites Vectors 8, 258 (2015). https://0-doi-org.brum.beds.ac.uk/10.1186/s13071-015-0865-7

Download citation

  • Received:

  • Accepted:

  • Published:

  • DOI: https://0-doi-org.brum.beds.ac.uk/10.1186/s13071-015-0865-7

Keywords